UKLEM -14 Surfleet, South Lincolnshire 5-6-7th of April 2013

[Jem]

Just to confirm that I won't be bring a hazer as it's now been sold.

Thanks

Jem

[Yag]

As it's only a few weeks off, could folks let me know if they need any mains cabling or distrubution? I'm not sure what's coming in terms of old and gassy things, but we have pretty much anything that could be needed in terms of Ceeform distribution and cabling!

[danielbriggs]

Rob,
If you could pog your hands on that DB we've used in the past that would be 100% ace
Something that's got a 63A 3ph, 32A 3ph, a 32A 1ph or two and a bevy of 16A 1ph would cover nearly every bit of kit I think possible.
I've paid Jim for a proper 63A 3 pole breaker, which I think he's going to install, so that would be good to use for the big stuff feed?
I'm planning on bringing my gasser again, would be great to see it running again. Probably not going to bring a scope to run, but highly likely going to bring a scope or two for others

Cheers,
Dan

[smogthemog]

Yup, we have a proper 3phase 63A breaker, 63A wall socket and plug now to draw off all we need
Hopefully it will be permanently mounted in the hall from this LEM so all we have to do it plug in and go. I may even fit a 32A socket as well in there.

As Pogmeister has said Rob, Distro and a longish cable run outside would be appreciated matey

[Laserhobbit]

All,

Thanks to the stirling efforts of Sir Briggs, I now am awaiting ownership of the various parts needed to make the chiller for my Laser Infinity YAG, those of you around last time noted we missed getting this up and running. BUT the good news is, with a bit of luck it will make it down to Surfleet this time and we will get this beast up and running. Jim for this reason a 32A socket in the hall would be really appreciated and mean we don't all huddle in the kitchen. A few things left to sort, but fingers crossed

At the very least I plan to bring my old RGB, air cooled argon and HeNe combo, with NEOS PCAOM and G120s. I will convert you solid state guys to gas, its my mission! Keep the faith Nige, hopefully you will have your new Scope, courtesy again of Sir Briggs??????

Cheers

Steve

[Yag]

Ok, sounds like you'll need:-

1 x 15m 63A 3 phase cable (kitchen-hall)
1 x 63A 3 phase splitter (will give two 63A 3 phase outlets in hall)
1 x 2.5m 63A 3 phase cable (jump in to secondary distro)
1 x distro board (63A 3 phase in, (splits L1 to 1 x 32A, 6 x 16A, 2 x 13A) and L2 and L3 to 63A single phase)
1 x 15m 63A 3 phase cable (to take things outside!)
2 x 63A 1 phase to 2 x 32A 1 phase (to break out L2 and L3 to 32A)

Plus an armful of 15M 16A and 32A cable to hook up stuff, and some 16A-13A blocks!

[danielbriggs]

Rob...
If that's not too much trouble, that would be 100% clacker-pog-tastic.
Now I'm excited

[smogthemog]

Pog!



lwfboafvblkasjdfbvlskjdfv

[Jem]

lwfboafvblkasjdfbvlskjdfv

Err... Loose wobbly floppy buttocks over a firm vag....

Damn Jim, that's one hell of an acronym!

[Yag]

Booked all that!

Should all fit in the car!