SALE----- LICONIX Helium Cadmium Laser and Power Supply for Sale ($600)

[CadmiumFreak]

I have a used LICONIX Helium Cadmium Laser and power supply up for sale!!

Model: 4270N
Hours Logged: 2524

Everything in Excellent condition, Power supply works, Laser powers up once warms up but does not emit for long period of time.

Power supply comes with power cord, and key to power on.
I have the original box from manufacturer.

Laser has all cables attached, all the base mounts with original screws. No cosmetic damage to laser. Excellent condition.
Was kept in excellent condition when used. I have the original box shipped from manufacture.

For both the power supply and laser, I have the operation manual. A real score if you know what your looking for.
Laser will power on when it warms up, it emits a yellow white beam.

Make me an offer I cant refuse! That price is negotiable!!!
I need to get rid of ASAP!! I'm moving and cant take it with me.

If you have any questions send me an email!!
photo_6.jpgphoto_5.jpgphoto_4.jpgphoto.jpgphoto_2.jpgphoto_1.jpgphoto_8.jpgphoto_7.jpg

[142laser]

What is the wavelength and rated popwer? Any idea the power now? TEM 00 or multimode? 325 nm? mW? Phil

[CadmiumFreak]

What is the wavelength and rated popwer? Any idea the power now? TEM 00 or multimode? 325 nm? mW? Phil

No, not sure on the rated power, or wavelength. Here is the best information I can find online.
http://www.repairfaq.org/sam/laserpic/lihcpics.htm

Says Power Can be 10mW and a wavelength of 325 nm.

[shrad]

I have 3 tubes (3500,4500 and 6000 hours, so end of life) and was looking for such a power supply

are you in europe?

if you are not able to sell it, I might be interested in the power supply

[CadmiumFreak]

I am not located in Europe, but I am able to ship anywhere in the world. I would like to try and keep both the power supply and
laser together. Lets work something out...

[GregR]

Does anyone have a list to match up Liconix power supplies with laser heads?
I have a 4240PS power supply and a 3205N laser head.

[pschlosser]

If I recall the model numbers correctly, I own a Liconix 4050 with a 4240PS. The PSU feeds the head with TWO high voltage feeds and one control cable, three cables in all.

And if I recall correctly, the Liconix 3205 calls for a PSU with one HV lead and one control cable.

You can sniff around eBay if you want a PSU for the 3205, there seem to be plenty around. But finding a working head for the 4240PS may be a real challenge.

[shrad]

I have three heads, but they might require prolongated powering to burn the excess helium