Help Needed from an Experienced Laser User

[Turbiner]

For an exhibition event here in my hometown, I bought a cheap laser (300$ -China made) and it's been 12 hrs honestly that trying to succeed to draw a simple text to be displayed on this laser but no luck at all so far.

The software comes with the laser projector called "Laser Controller" is a crap in fact it does not working properly to convert / create ild files under w*n***s 7.

What I request you either share the working software with me if you have one or please create a text laser show for me which is compatible with that cheap RGB laser. Texts would be;

"ROBORIDE & INMAK"
"ROBORIDE ROBOTICS"
as scrolling or
if above texts are to long for such a cheap laser device just prepare a text only as;
"ROBORIDE"
and text color GREEN would be nice

This is my responsibility for the firm that I work, and I will be appreciated if someone helps me.

Thanks in advance
Mert

Laser Details

http://www.oxlasers.com/sdp/925334/4...tml#normal_img

[masterpj]

Text is complex.
With a cheap chinese laser you are either looking at stepper motor scanners or cheap galvo's with low scanspeeds and horrible linearity and such.
It often requires a high amount of cornerpoints to properly display something and is only capable of scanning at a slow rate on top of that.

I'd say: save up for a scanset that can do 30kpps.

[mixedgas]

I will try to have something for you to try in the morning. I have older software tools that create a more optimized text for slow scanners.

Steve