Ilda line drivers and line receivers

[mixedgas]

Attached is the ILDA recomended example schematics for ANALOG ILDA connector compatable levels.

Is Thank You Ware, You download it, you post a thanks.

Steve

[-bart-]

Nice!

I expected nothing more funky than that.
Although a reference to an appropriate agnd and dgnd topology could have been made.

[mccarrot]

thank you for sharing page 15, make me curious about page 1-14

[mixedgas]

thank you for sharing page 15, make me curious about page 1-14

And your not at least curious about 15-99?

Steve

[mixedgas]

Nice!

I expected nothing more funky than that.
Although a reference to an appropriate agnd and dgnd topology could have been made.

There is a LOT of text that goes with this, including lumias, signal definitions, signal polarity vs beam direction, impedances, loads, protocols, specific types of Belden wire etc.

I'll dig up the digital one, no difference in grounds is mentioned...

Wait till you see the ORIGIONAL ILDA connector, its a big milspec plastic circular connector.

Steve

[mccarrot]

Need more laser lecture.... NEED MORE LASER LECTURE!

Wait till you see the ORIGIONAL ILDA connector, its a big milspec plastic circular connector.
Steve

Yes I know, but this was also the time you needed to feed your laser water, else it would be mad and steam was getting out of his ears

[no-esc]

As always thank you Steve for sharimg your knowledge of us