Two quads, for trade, sell

[tonyaztec]

No worries, Adam. Not a good time of year for most, bloody Santa.

Philipp you have a PM

[tonyaztec]

Ok,I'm looking for £80 per bare quad (without lenses)
I have 8 optima lenses in there brass mounts £100 for the 8,
I also have 4 LPC826 diodes, £20 all 4.

Plus shipping.

Thanks Tony

[polishedball]

Is the knife edge mirror hight adjustable or fixed? I know some of Edison's you could raise in lower for stacking. Is this the case with these. Thanks.

[tonyaztec]

No Its fixed on both sets, I tend to put masking tape on the mirrors and set the diode just past threshold to set the height of the mirror as the epoxy sets.

[edison]

Because i designed these let me do some explaining. The height of the diode can be set in both stacking systems. In the set with the red baseplate the diodes can be set individually and with the black set they can be raised and lowered as a pair. The great thing is that with the green diodes coming up it might be a good investment on the long run. Of course they should be in a 5.6mm can instead of the 3.8 now but i think that will happen in the future. You can start with 660 nm diodes and then swap to 637 in the future

[tonyaztec]

Flexmods now Sold.

[tonyaztec]

Still have these, happy to take offers, just collecting dust, any use to anyone?

[andy_con]

scrap value of brass is very good tony