Got some more MOBO stuff for sale. I have converted two "g-beam" lasers into RB units. They have a M140 with 4mm Optima collimator diode and a P71 diode with 8mm collimator. This gives aprox. .2 X 3.8mRad beams that overlap very well. They are fade-able in 256 steps for each color. However, they don't start to come on until around DMX value 20-30. They do aprox. 250mW red and 800mW blue out of the apertures. These things are bright!! Makes really great pinks and purples! They use the standard Mobo 5V supply plus another 12V 2Amp supply for the diodes. There is a Interlock that breaks power to the actuators. I had planned to make a e-stop with key but never did. The #1 unit has red on DMX channel 9 and blue on channel 11 and turrets on 1-8. Unit #2 has red on 25 and blue on 27 and turrets on 17-24. The diode channels are not dip switch addressable. I can program them to what ever you want before they ship. I have not had these varianced. So, the standard USGOV stuff applies. I have seen g-beams go for $500-800 on fleabay. I would like to get $600 each. 5% goes to PL. Thanks!