Hi 2Tall,
Regarding the PT-iTrust card, I have them installed in several different projector configurations and haven't had any difficulty with any of them in DMX mode or when connected to a DAC via the ilda connector. Do you need the instructions for the card as well? If so, I will get you a
PDF. If you intend to control the card via DMX or by a DAC, the first 9 dip switches are for the DMX address and dip switch 10 needs to be set to on. Otherwise the dip switches control the mode, such as audio or auto.
That card supports TTL or analog modulated lasers (0-5v) with no issues in my experience. Of course the card is not necessary if you connect your lasers and scanners directly to the ilda connector.
David