Results 1 to 2 of 2

Thread: (3) Synrad CO2 Lasers (2) complete 125w systems and 100w head for sale

  1. #1
    Join Date
    Jan 2013
    Location
    Bothell, Washington
    Posts
    64

    Laser Warning (3) Synrad CO2 Lasers (2) complete 125w systems and 100w head for sale

    Hello,

    I have 3 Synrad lasers up for sale on Ebay. I will post the links below.

    Both 60-1 systems with the Power One RPM5 30V DC 100amp power supplys will run on Single Phase!

    1st system is currently doing 130 watts measured with a Synrad Power Wizard 250

    The system includes:
    (1) Synrad 60-1 Evolution CO2 Laser head,
    (1) Synrad RF3000 Evolution RF Driver,
    (1) Power One RPM5 (Synrad DC-100) 30v DC 100amp power supply,
    (1) Synrad UC-1000 Laser controller ,
    (2) Synrad RF cables for connection between RF3000 and 60-1 Laser Head,
    (1) Synrad DB9 interlock cable for connection between RF3000 and 60-1 Laser Head,
    (1) Synrad BNC cable for connection between UC-1000 controller and RF3000
    (3) Synrad 6awg power cables for connection between DC power supply and RF3000.

    http://www.ebay.com/itm/261159441112...84.m1558.l2649

    I would sell it for $3500 plus shipping and crating to members of this forum

    2nd system doing 133 watts measured with a Synrad Power Wizard 250

    The system includes:
    (1) Synrad 60-1 "Classic" CO2 Laser head,
    (1) Synrad "60-RF" RF Driver,
    (1) Power One RPM5 (Synrad DC-100) 30v DC 100amp power supply,
    (2) Synrad RF cables for connection between 60-RF and 60-1 Laser Head,
    (1) Synrad DB9 interlock cable for connection between 60-RF and 60-1 Laser Head,
    (2) Synrad 6awg power cables for connection between DC power supply and 60-RF.
    Also included are the necessary cooling hoses needed to connect between the 60-1 head and 60-RF, and the manual for the system.

    I am including a UC-1000 controller however the controller does not seem to power on. Possibly it can be fixed or worst case you will need to purchase another one. They sell for around $300 on Ebay. You will also need a BNC cable to connect the UC-1000 to the 60-RF. You should be able to get one for under $10

    http://www.ebay.com/itm/261159861172...84.m1558.l2649

    I would also sell this one for $3500 plus shipping and crating to members of this forum

    3rd is a 57-1 head only not a complete system doing 119 watts measured with a Synrad Power Wizard 250

    You will need a AC-DC 30V power supply as well as a RF Power supply and UC-1000 controller. I can include both for an additional $2000 .

    You will also need (2) RF cables, (1) DB9 interlock cable, (2)6awg DC power cables and (1) BNC cable. I do not have any spares of these but they can be made on your own or you can find them from another source.

    I will sell this head for $1000 plus shipping and crating to members of this forum.

    http://www.ebay.com/itm/261159871208...84.m1558.l2649


    I also have a spare 30v DC 100amp power supply that would work great for any one of these heads. However it is 3 phase . $350


    Regards,

    Kevin
    Attached Thumbnails Attached Thumbnails evo1.JPG  

    evo2.JPG  

    evo3.JPG  

    60_1_1.JPG  

    60_1_2.JPG  

    60_1_3.JPG  

    57_1_1.JPG  

    57_1_2.JPG  


  2. #2
    Join Date
    Dec 2007
    Location
    Stockholm, Sweden
    Posts
    551

    Default

    I guess any of these would be hideously expensive to ship to Europe (Sweden)? I'm tempted!
    Is the PSU for the 60-1 E a auto input switcher that can be run off 230V also?
    I have a few smaller Synrads and I always wanted to have a full sized one!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •