China RGB laser modules: worth it?

[WolfMax]

I have plenty, $15AUD each

Thanks Dave. But what would the cost be for 2 + P&P to the UK in GB pounds? And are they the very small ones (just Y axis adjusters)?

[norty303]

Sorry, that'll teach me for not looking at the pictures properly!

[hybridz0rz]

Thanks Dave. But what would the cost be for 2 + P&P to the UK in GB pounds? And are they the very small ones (just Y axis adjusters)?

Ohhh, I would also be interested in these mini flexmounts for 2 bricks. one for refitting with DTRS rgb bundle and one for an working brick but with simple rods holding glued dichros :P

-Hybrid

[WolfMax]

Ohhh, I would also be interested in these mini flexmounts for 2 bricks. one for refitting with DTRS rgb bundle and one for an working brick but with simple rods holding glued dichros :P

-Hybrid

I'd be wary of using DTR's bundle with the dichros from the brick. I used the dichros from a brick in my build (waste not want not) and found the reflect blue pass red /green reflected the green from DTR's bundle too! Must be the wave length in DTR's green is smaller than the green DPSS laser in the brick and over the threshold for reflection of the dichro. I have another different dichro I will use and see if that is better.

[swamidog]

the laserwave dichro set works *very* well with the DTR bundle. i strongly recommend it.

I'd be wary of using DTR's bundle with the dichros from the brick. I used the dichros from a brick in my build (waste not want not) and found the reflect blue pass red /green reflected the green from DTR's bundle too! Must be the wave length in DTR's green is higher than the green DPSS laser in the brick and over the threshold for reflection of the dichro. I have another different dichro I will use and see if that is better.

[SaltyRobot]

@Swami. Where did you get your laserwave dicrhos from. I was not able to find them and ended up going with the KVANT ones. I would like to get some laserwave ones for comparison.

[swamidog]

i got them from planters when he was working as a laserwave reseller.

send an email to bridge@laser-wave.com.

@Swami. Where did you get your laserwave dicrhos from. I was not able to find them and ended up going with the KVANT ones. I would like to get some laserwave ones for comparison.

[WolfMax]

the laserwave dichro set works *very* well with the DTR bundle. i strongly recommend it.

My other set are from StanWax. I haven't tried them yet as I'm waiting to get new Flexmod drivers to replace the ones that failed.

[hybridz0rz]

I'd be wary of using DTR's bundle with the dichros from the brick. I used the dichros from a brick in my build (waste not want not) and found the reflect blue pass red /green reflected the green from DTR's bundle too! Must be the wave length in DTR's green is higher than the green DPSS laser in the brick and over the threshold for reflection of the dichro. I have another different dichro I will use and see if that is better.

Thanks for the heads up WolfMax, I would never have thought that it would be that close to the limit of the dichro ;P, I'll be sure to get some Kvant or Laserwave dichros for the brick once i decide to rebuild it , Would make a nice pair with my other brick PJ as satellite projectors But did Dave sell those mini flexmods or just the regular once? I cant find the mini once on his site (http://lasershowparts.com).

-Hybrid

[WolfMax]

But did Dave sell those mini flexmods or just the regular once? I cant find the mini once on his site (http://lasershowparts.com).

-Hybrid

He hasn't replied to me, so I don't know if he has some of the 'Nano' mounts but hasn't put them on his site (I call them Nano Flexmounts as Micro Flexmount is the name used for the larger standard version).