all m3 and m9x0.5 threads on the abofe were done using my tapping head, best tool i own.
saves hours and hours of tapping by hand
all m3 and m9x0.5 threads on the abofe were done using my tapping head, best tool i own.
saves hours and hours of tapping by hand
Eat Sleep Lase Repeat
Just a bit of tapping info, for these diodes holders I just finished in total there were 100 holes to tap. The machine with tapping head did the lot in 15 mins although not all at once.
Now you try tapping 100 holes in 15 mins by hand
Eat Sleep Lase Repeat
Great work Andy!
I hope it is still enjoyable for you to do this after doing it for so long.
Some times for me it all becomes boring and I get sick of it.
Awww, pretty soon I will be doing lots of fishing instead, love the summertime!
i never get bored of lasers.
i get lots of satisfaction from machining all the parts then putting them together and seeing a finished product.
Eat Sleep Lase Repeat
All 20
Eat Sleep Lase Repeat
Con-herent....I also find machining to be of GREAT satisfaction....and I suspect/speculate....the same genitic code that is envolved with the appreciation of coherent and almost perfectly straight beams is expressed in our love of machining metal to our design ...with straight and true geometry....maybe ??? And...nice pics of the chips !!
Beam Out_______
Beam Axiom #1 ~The Quantum well is DEEP ! Photons for ALL !!
.
Beam Axiom #2 ~Yes...As a matter of fact...I DO wear tinfoil on my head !!
.
Beam Axiom #3 ~Whe'n dout...Po ah Donk awn et !!
.
Beam Axiom #4 ~A Chicken in every Pot, and a Laser Lumia in every Livingroom !!
.
Beam Axiom #5 ~"Abstract Photonic Expressionism"....is "Abstractonimical" !!
.
Beam Axiom #6 ~ "A Posse ad Essea" ~ From being possible to being actual ...is the beam target !
Nice work Andy.
Out of curiosity, have you any future plans to do any diode mounts for the likes of the 3.8mm 520nm Green diodes?
They may only be 50mW right now but you can bet higher powers will be along soon and the demand for multi diode 520nm Green heads won't be far behind.
Carl
2 x Stanwax Laser 3W RGB's
2 x OPT 10W RGB
Pangolin FB3QS + Live Pro
1.3W Laser Harp
i have already done a 3.8mm diode holder as i have a load of 120mw 638nm 3.8mm diodes here.
Eat Sleep Lase Repeat
Yeah I love machining when it's for your own parts and fun projects.
Tapping is my least favorite operation. A tapping head will even make that fun.
I'm going to bite the bullet and buy a nice one like yours. My current project will have a lot of tapped holes plus future jobs will make it worth it.
I'm impressed with how quickly you have ramped up your skills.
That's some great work to you are doing there Andy. Nothing like passion and hours dedicated to that passion to get results!
Keep the pics coming.
get a tapmatic one, expensive but worth every penny and very high quality.
many thanks
Eat Sleep Lase Repeat