mitsubishi P73 diodes

[badger1666]

You will be needing a set of cylinder lenses from dave on this forum
As secondry beam colimation , but first. You will need be using one of daves 2mmfl asphere lens
In the adjustable diode mount, i suggest you read all of this thread http://www.photonlexicon.com/forums/...ght=Holy+grail
It will teach you what you need to correct these reds correctly
But first

hello all,
I confirm, "DTR" is very fast for the delivery of laser diodes
quick question: I'm on a similar project with the same diodes, what kind of optics do you use to correct the beam???

Nicolas
France. / Brittany

[slogan]

thank you for this information
before optical correction, I was thinking of using this kind of lens:

http://cgi.ebay.fr/ws/eBayISAPI.dll?...ht_1720wt_1186

that you think?

You will be needing a set of cylinder lenses from dave on this forum
As secondry beam colimation , but first. You will need be using one of daves 2mmfl asphere lens
In the adjustable diode mount, i suggest you read all of this thread http://www.photonlexicon.com/forums/...ght=Holy+grail
It will teach you what you need to correct these reds correctly
But first

[astatic]

@slogan

At DTR you can buy exactly the same len in a retainer so you could screw it in the diode housing.
These lenses are called the G-2 lenses.

[badger1666]

The g2 is a good option but better results can be had with daves 2mmfl lens ,give a better apeture beam size which is good
When you want to combine 2 or 4 diodes