Thanks for the offer of the 6810. But have a bunch of galvos sitting here that I haven't had time to play with
I was hoping they had the stanchion style mirror mounts I could use on my 6230's.
Senior Member
Thanks for the offer of the 6810. But have a bunch of galvos sitting here that I haven't had time to play with
I was hoping they had the stanchion style mirror mounts I could use on my 6230's.
Senior Member
Brad, Steve pointed me in the right direction for the connector, I'll edit this post once I find something
Yeah.. well, I jumped the gun a little.Originally Posted by logsquared
Good point. Thanks.To send extra $ to Pl I just look in my paypal for the address the monthly payment goes to and send to that.
Creaky Old Award Winning Bastard Technologist
Lanek, Thanks!
Steve
Last edited by mixedgas; 04-08-2013 at 17:41.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
Senior Member
123456789012345
"its called character briggs..."
Senior Member
Admin@photonlexicon.com via pay palAlso... since I have a subscription and pay $10 per month, I can't find the donate button anywhere for an additional payment.
Hints?
Support your local Janitor- not solicited
.
Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.
Creaky Old Award Winning Bastard Technologist
It just took a extra two days for the install in Montreal, some parts had to be shippped in, and a extra day for the customer's electrician to rough in some needed wiring. This is perfectly normal in the fixed laser install world. But I'm back, and after a day of dealing with the airlines and US and Canda customs, + TSA/CATSA I feel the extreme need to get something done. So the LM12s are unboxed and the soldering iron is hot. Here we go!
Steve
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
My LM12's arrived yesterday. $60 on blind faith, as I have NO idea what to do with them so.... they're going into the box with the motors and scanner block for the time being.
Creaky Old Award Winning Bastard Technologist
Brad, when I send you your two amps, you can send me two LM12s. All amps from DSLI_Jon except one had blown LM12s.
Reason being, I fixed four scan amps tonight, so I have two for you, two for Lanek, two for Mophead from last week repair session. Its 30 minutes after midnight and I'd done, after three and a half hours of Amp troubleshooting
The one for Swami's project is oscillating badly and nearly cooked my beat up old test galvo. But I will find what is wrong with it, probably a bad feedback network or the wrong feedback capacitor, and fix it too.
They are all running on a square wave generator while watching feedback on the oscilloscope . Tomorrow I will recalibrate the amplifier position sensor gains and offsets with a laser per the Cambridge manual
So gents, make that donation to Spec as I requested.
Steve
Last edited by mixedgas; 04-13-2013 at 21:50.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
Senior Member
Ok steve, I sent a little something to admin and wrote a short note to let him know it was all your doing
please don't forget an extra pair of galvos to go with that amp. (we' ll talk about this whenever you have the time)
Thank you very much!
ps. I was a bit surprised by the "Kyrie Eleison!" in the signature. This is very familiar to me as it is in my native language
"its called character briggs..."
Posting Permissions
Reply With Quote
Bradfo69
