DIY RGB - Good quality 2W green 532nm module ?

[goldenstarmimi]

Okay thank you all very much for the info !

Everything will be monted on a fan cool radiator.

Red and Bleu will be from Kvant, and I gess then I'll go for a green laser wave !

I'll post some picture of the result soon

How much is Red 1.5W/637nm and blue 3W/445? 40% discount they offer or 30% discount? Anyway, their red and blue is good too. All the laser module is OEM module, you need to add thick laser diode plate 6mm or 8mm, and heat sink with fan under the laser diode plate.

[djem]

I did place an order for a 2W Oem from Laser Wave, thanks all for the help

[Steve Milani]

Yes, correct, but I am not Winni, I am mimi, both of us are in Golden star , Winni is sales lady, I am the one who do everything in my company!

Oh!....Sorry!
I apologize Miss Mimi
I've read wrong your ID name placed on top of your post.
Anyway both of you are wonderful ladies

[badger1666]

Hey dj jem where are you in the world ?
I ask as you might find the power supply that
Came with mine was for 220v which is fine for most of the world
But you maybe in a 110v country

I did place an order for a 2W Oem from Laser Wave, thanks all for the help

[olive13]

Hi
I confirm.... lot of problems of missalignment with lastest generation of CNI DPSS MGL-H Series
It's a shame because CNI have twin TEC ; The linearity and sensitivity is better...
New generation of Laserwave OEM DPSS could be an alternative.
To check stability over years...

@Chris : Djem is a french guy.

[buffo]

recently purchased a couple of dhom 1w's doing ~1.6 - 1.7 watts each <snip>
An amazing bargain at $700 for the 2 lasers

$700 complete for the pair of lasers, or $700 each? And if it was $700 for the pair, where did you buy them from? (That's a really good price...)

Adam

[m0f]

Bought them from Goldenstar, $350 each. The shipping normally adds a bit to that, but was buying a case / road case at the same time had them packed in with that.

Got the pair scanning last night, modulation even seems to be an improvement over the 500mW CNI's I used in my last builds. So far so good..

[djem]

I'm currently waiting for the unit, will make some measure when it arrives

[goldenstarmimi]

Yeah, we are going to ship it out today, it just arrived at our factory today. It is near holiday for Labor's day from April.29 to May.1, hope the flight is normal.

I'm currently waiting for the unit, will make some measure when it arrives

[goldenstarmimi]

Yeah, the cheap one is from DHOM or OPT, it is with big PSU , fan cooling, the beam is not so sharp as laserwave or CNI,but for beam show, it is ok.