post your eye melty abstracts here

[Galvonaut]

NICE!

I especially like the Transcendence show -
must look awesome in "real laser"!

Thanks Stuka. Unfortunately my lasers are a bit underspeced for these shows, however I did have a play with Jem's laser at UKLEM - although I failed to realise that I could have scanned at way more PPS. This is projected on a white wall, so detail is a bit blown out.
I designed the shows blind as it were, so I was more than pleased that so many abstracts scanned.

[DZ]

That would be really cool versus a separate box. Would that just be a rewiring of the front plate? It also appears there were/are a number of controls for the color mod. Will that all fit in a 2U space?

If I could make it work with in a 2U panel, it would end up being a replacement of the Z-5 enclosure. Currently, it's an 8U top 2U bottom and available on the market is a 10U top 2U bottom enclosure. So the original panel wouldn't change.

[swamidog]

If I could make it work with in a 2U panel, it would end up being a replacement of the Z-5 enclosure. Currently, it's an 8U top 2U bottom and available on the market is a 10U top 2U bottom enclosure. So the original panel wouldn't change.

you're rapidly running out of hands to work the console. want to borrow my neural abstract interface?

[DZ]

you're rapidly running out of hands to work the console. want to borrow my neural abstract interface?

Not a bad idea! I'm actually building this for the Jatravartids so I think they will be ok with it!

[swamidog]

Not a bad idea! I'm actually building this for the Jatravartids so I think they will be ok with it!

i hope you're including an aerosol deodorant function.

[Galvonaut]

my shows tend to work very poorly as beam shows. in the same way most beam shows are quite boring to watch at termination point. it requires a different structuring of the light.

I have a theory that by creating abstract shows I will be better able to control my beam shapes and effects when I create beam shows. Some abstracts work really nicely as beams, but not many.

[Bradfo69]

Merely a thought - one of the things about the Gatorbox I don't care for is the lack of a hard lid to protect the knobs and switches. I know in the end it would both cost and weigh more but, if you're exploring ways to add the color mod panel to the existing Z-5 builds, I'd be up for a case with a hard lid, should it have the necessary 10U and 2U configuration.

[laserist]

So guys, it's been fun and it's been unreal. I'm finding this - whatever it was - almost as disappointing as the last ASTC conference. So I'm going to throw in the towel. Feel free to parse the following any way you like: (Yes I know - you don't need my permission.) I wish each of you the greatest success you can imagine.

[DZ]

Merely a thought - one of the things about the Gatorbox I don't care for is the lack of a hard lid to protect the knobs and switches. I know in the end it would both cost and weigh more but, if you're exploring ways to add the color mod panel to the existing Z-5 builds, I'd be up for a case with a hard lid, should it have the necessary 10U and 2U configuration.

As it turns out, the enclosure I looked at does have a hard top: https://www.skbcases.com/music/produ...et=&c=142&s=80

[flecom]

As it turns out, the enclosure I looked at does have a hard top: https://www.skbcases.com/music/produ...et=&c=142&s=80

is it wrong that road cases make me feel funny inside?