High Power 445nm PBS Cubes

[platinum]

I just need two PBS cubes. If you happen to have these available, that would be awesome. Something that has proper adhesive for higher power applications. Ideally, these would be ~12.7mm or thereabouts.

I contacted JML Optical but, as discussed in another thread, they only do custom runs now.



- Jonathan

[dsli_jon]

Check with Lambda? http://www.lambda.cc

This one http://www.lambda.cc/106.asp should be fine, power-wise.. (up to 0.5 J / cm2..) avail. in one-off, 1/2", coated for 442 +/- Their quote, unquote "High Power" ones are more for 'truly-high' powers (10 J / cm2 / pulsed, etc..) so anything at 'sane light-show powers', should be fine with the '106', there..

I believe Eric (planters) had good-experience with them / these 'uns.. He's prolly got more data...

fwiw
j

[platinum]

Forgot to check with them. Bought two 20mm cubes. (They were out of the smaller sizes.)

Thanks!