LOOKING : Projector Enclosure sellers

[Kosh]

I have upgraded my projector and I need a larger case. I am looking for locations that sell projector cases.

[tonyaztec]

Have you tried these?

http://www.goldenstarlaser.com/laser-case-c-67.html,

Speak to Winni or Mimi.

[Insanity]

I have a nice big enclosure for sale: http://www.photonlexicon.com/forums/...osure-gratings

[Picasso]

I'd go with a single color green projector from http://www.eightonlight.cn/ Hard to beat the prices on greens from them. Has the best cases I've seen for the buck, but you can only buy completed projectors from them. Can build your blue and red and install for RGB.

[RGbee]

Found this company (spectrabeam) in germany that sells 2 types of enclosure:
One double layer with a shelf already installed:
Black powder coat
cut-out for fan
Rear cut-out for combi IEC connector, DB-9 and DB-25
Dimensions: Ca. W 350 mm * D 250 mm * H 130 mm
Incl. bracket for truss mounting The optional accessory kit includes:
- 2 60 mm fan grill
- 1 fan 60 mm 12V
- 1 exit window
- 1 combo input connector with fuse holder, switch and filter
Not bad for 149 eur
http://www.spectrabeam.de/product_in...d-construction

The other is a single deck construction (no shelf) and looks to be exactly the same as the bulletproof case i had from Laser Visuals. That being the case (no pun intended), there's plenty of real estate inside for a decent power projector:
The aluminum plate inside is about 10 mm thick ( may be 8 or 9 mm ) but thick enough to hold the components.

It has:
- 2 x 8 cm fan opening
- 1 x 230 volt connection port for euro plug
- 2 x ilda db 25 hole
- 2 x dmx hole
Dimentions (assuming it's the same as the LV are: W 500 mm * L 350 mm * H 120 mm
On the front the output window is about 10 cm wide and 8 cm high. This allows for both scanners as well as lumina effects to be mounted inside.
199 Eur
http://www.spectrabeam.de/product_in...-Enclosure-NEW