Please post links/pics of the smallest moving head lights you have seen. Looking for a large number of moving heads for a new project next year.
Please post links/pics of the smallest moving head lights you have seen. Looking for a large number of moving heads for a new project next year.
I got this thing in my room. They threw it in the waste bin when I was working in a DJ shop and I fished it out (with their consent). The blue LED doesn't work and the tilt motor is broken, so not really useful. Most of the time I just let it pan around slowly. It has some beautiful gobos though...
I don't know the manufacturer, but a Google search for "mini LED moving head" reveals the same unit. The price sticker reads €250. Not sure if that's what you after, but I believe this is the smallest RG(B) moving head I've seen so far. It doesn't produce much light though...
What type of moving head are you after?
Wash, spot/profile, beam or effect?
Or is just a case of cannabalising a moving yoke?
If in doubt... Give it a clout?
Have a look at these: http://www.robe.cz/products/article/robin-100-ledbeam/ have 40 of them and they are fast and powerful.
Also these: http://www.robe.cz/products/article/robin-minime/ its a small video projector/moving head, had one for demo and it was not bad for a 300 ANSI Lumens.
They are much more expensive but you will have them working next year and probably many after that.
Fogscreen eMotion 2,2m walkthrough screen
Tarm 2W RGB witn CT 6800
2 x 1W G with DT40W
2 x Edison case with Ems-7000(upgraded), Edison 1,3w red and blue.
4 x 1500mw RGB
LSX pro with Etherdream
Fiesta.net + slave
Moncha.net
I'm hunting something much small. Think R/C servos and single emitter.
These were really tiny but out of production, i'm affraid,
http://www.hansamsystem.com/2005/pro...etManualV3.pdf
I have two one works fine the other one the stepper motor just rotates the gobo with no control I had extra controller chips the company a bought them from had sent me I tried swapping those no change stepper just kept rotating I see there are more chips on the driver circuit with heat sinks on them I do not have any spares for those I wish I could get a schematic for one of these heads.
I removed the gobo from the one head and use it for a wash light for now until I figure out whey the one gobo motor just spins.
Maybe the hall sensor doesn't pickup the magnet attached to gobowheel.
Hi Bart
Very good point I will look into that.