Page 1 of 15 1234511 ... LastLast
Results 1 to 10 of 149

Thread: Who 'd like test our dichoric

  1. #1
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default Who 'd like test our dichoric

    Hi All,
    Our new dichroic, both reflection is >99%, transimisson is >97%.
    for 10*20*2mm unit, retail pices is 15USD/pcs, if you buy >10pcs one time, prices will be 10USD/pcs.
    we also had diameter 15*2mm unit, but prices will be little expensiv than 10*20*2mm
    We had enough units in stock, so can shipping quickly after your order.
    Attachment is ourselves test.
    We Who is like test our new dichroic(both 10*20 and 15mm unit, each at least 5pcs for test the uniformity), we will send to him free for test ,without he pay any prices, including shipping prices is our pay, We will using DHL shipping.
    the person we are looking had below feature.
    1.Who had been here long time, more than 2 years.
    2. Who lived in Europe or American
    3. who had blue, red and green lasers, both laser power is higher than 1W, who had adjust mirror mount to ensure the dichroic is well mount and right angel input, also he had all world trust powermeter just like cohnrent or Gentec, not the personal done powermeter
    4. Who had the warm heart and time to do test, he know how to test, he know his test result is correct, he will open and share his real test result to here all.
    5. who had well ruputation here, we great thanks you if you'd like recommend yourself or someone to do test, we will choose 3 people to do vote(All people can vote 1 ticket to 1 Person) to see who is finally choice. the choose person will had more chance to do our more new products in future too, or he had the right buy our products with very very attractive prices.
    6. we'd like this dicision done before our holidays(Our Country National holidays will begin from 1th-7th October), if not, we will along one more week after our holidays, then after holidays, we can shipping to the right person.
    7. The choose Gentleman agree finish and open test result within 2 weeks(better in one week)
    8. If no more than 50 people take part in this event, we will cancel and find other way to do test. The final right to interpret is belong to Laserwave.
    Thanks for all.
    Best regards!
    Bridge Tan(Laserwave)
    Attached Thumbnails Attached Thumbnails 合光镜片测试结果.pdf  

    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  2. #2
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,599

    Default

    Excellent results. Can you do it with 520 nm green please. This looks promising.

  3. #3
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    Our powermeter smallest is 10W unit, 520nm is only 30mW or 50mW, so our powermeter will had little deviation, I wish someone here would like do test of 520nm.
    Anyway, thanks for your reply, when our Engineer had time, we will try it, .
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  4. #4
    Join Date
    Aug 2005
    Location
    Silicon Valley
    Posts
    442

    Default

    I didn't quite follow all your terms and conditions, but I can certainly characterize your new dichros. In addition to testing with lasers, I can get spectral plots of transmission and reflection with my USB2000+ spectrometer. I just set up a broadband light source so I can test from 350m to 750nn just in case someone wants to use these with a 405nm diode.

  5. #5
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    Junktronics that would be a great test! I would like to see a spectral plot.

    Also bridge I have a nice Thorlabs 1/2 watt photodiode head. It is good for low power tests. I also have a 520 diode.

    chad


    When the going gets weird, the weird turn pro.


  6. #6
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,845

    Default

    I'd be happy to test them as well if you need an extra pair of hands.
    I would test them on my temp. stabilised OceanOptics S2000 spectrometer, with broadband illumination, to provide a transmission/reflection plot. I have a test assembly already setup on a breadboard that mounts the mirror at exactly 45deg, and uses transmission/reflection probes for the measurements.
    If needed, high and low power performance can be obtained with a Coherent LabMaster Ultima (E.g. 10W OPS 532nm, 5W 515nm etc.)

    Dan
    - There is no such word as "can't" -
    - 60% of the time it works every time -

  7. #7
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    I will be glad to test on a lab grade spectrophotometer at any wavelength you wish. I have the Coherent power meter and I can easily exceed one watt. I can test using laser at 445, 457, 477, 488,504, 514,520 diode, 532, 640, 647 and 676

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  8. #8
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    Thanks for all of you support, pleasure to know here are many professional people and professional tools you had.
    Wish more members here can see this and interesting do test.
    Best regards!
    Bridge
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  9. #9
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    We do test 520nm today
    Quote Originally Posted by kecked View Post
    Excellent results. Can you do it with 520 nm green please. This looks promising.
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  10. #10
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    why I can't upload files
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •