DutchLEM 2014 - FINAL DATE : 17-18-19 January 2014 !

[SrS]

Is there any specific testgear needed? I can bring some like lab psu, oscilloscope, thermal camera, multimeter etc.

[Guido]

Hi,

if anyone needs some 520nm / 120mW Osram´s with 5.6mm Housing ... i have 10pcs left..80 Euro e.a. , only Diode, no Housing / Lens
Original Osram, no Chinese Crap :-)


Greetings
Guido

[PeterB]

Hey guys,

Due to some changes in my calendar I can only pop by on Sunday.
So I will probably not be able to bring the gear I mentioned in my earlier post.

If there still is something in my previous post that you would want to buy, send me a PM and I will bring it.

See ya'll sunday !

[PeterB]

Hey guys!

Lots of positive vibes i am feeling, Peter B bringing his stuff (will check out your website didn't know of it... so i will in a few minutes, maybe a special LEM offering if people want to buy stuff from you ?),

I am afraid I have to rectify your post a little Bob, due to some unforseen changes in my schedules for the weekend I cannot be there any sooner then sunday.
I am so sorry for any disappointment that may have caused.

PJ brings his new shows to be bought for a discount (or you can just watch and enjoy), Joost bringing the full diode lasers (does anyone bring a calibrated powermeter so we can see how the green performs and looks next to a "normal" greenie ? I know Joost posts a lot of cool pictures but i think it's always best to see with your own eyes, i personally am very very interested in those greens. Then Johan will bring loads of stuff from his cleaned out workshop which sounds interesting.

I'll bring my recently calibrated laser power meter. Ranges up to 30 Watts max so that should be sufficient for any emasurements.
Anything else that's needed, please PM me

As for the LEM DEAL, Sure I got something in mind, but will have to hear what you are all looking for.

See ya'll sunday !

[PeterB]

ik zoek nog flight case voor apr 40 en twee (tijdelijke) sattelietjes voor opvulling

Vraagje, hoe tijdelijk is dat en hoe zwaar ( qua vermogen ) moeten die zijn ?
Heb nog twee hele leuke 500 mW groen ( 800 mW haalbaar ) , klein en compact. Nieuw in doos.

[masterpj]

Will take the powermeter I lend from you Hobbybob
Not done with it as my 5W 808nm diode pump is taking ages to arrive but I will try to finish off the circuit board for the DIY LPM so I can calibrate it incase you need it back .
It's the etching where I didn't have the time for yet.

Correct on the Discount, shows will be on discounted sale (especially if you purchase multiple in one go).
The shows are ment for RGB lasers and are beamshows which is either for 3 or 1 projectors.
Graphics shows cannot be pre-ordered as they aren't done yet and as much as I would love to do pre-orders for these I rather want to assure something is done and nice.
The shows are getting another checkup right now so they are really nice.

Shows are available in the following formats:
- Ilda V5 (full color ilda format)
- Pangolin BEYOND Format
- Pangolin LD2000 format (This format includes free DMX programming bundled with the show).
(DMX channels used: 1&2, 3&4, 4&5, 5&6) (Will include a readme for additional DMX use, they are for pyros and you are required to use a terminator to avoid any noise or signal bounce).
(I'm also not responsible for any unsafe use if you are using the pyros with the pre-programmed show, you should always have a setup which is fail proof if something goes off unexpectedly).

Forgot to ask: I'm in need for a small bit of indium foil (paying for it).
Does anyone have this at hand? if not please reply quick because then I'll order it from china then because the chinese new year seems to be coming up (meaning that I can't order stuff for a while).

[michelrietveld]

Is a beamer still required? if so i can drive to the office tomorrow and pick one up.
Michel

[hobbybob]

Would be great Michel, as i heard from Joost that Ernst would be there on Saturday ?
I will call Ernst to see how to transport the much needed truss.

[michelrietveld]

Beamer in the pocket ;-)

[michelrietveld]

Wish list :

soldering station
oscilloscope
multimeter
Powermeter
Beamer (provided by michel rietveld)
Truss (provided by ernst beumer)
.....