80W 532nm YAG up and running! :) [Very image heavy]

[swamidog]

i wish i was close to san jose...

Doing some spring cleaning and realized that I've got one of these machines here. Along with a couple of 700/800 series (1 water cooled, 1 air cooled). And parts to build 2-3 more. And a couple of 110V powered [redacted] (which is like a mini version of the 80W that does 20W). Anyone near San Jose interested before I dump all this [redacted] equipment on eBay?

[planters]

You must have a pretty impressive inventory to incidentally find a couple of these gathering dust. I am interested in the "mini" versions. Are they lamp pumped, Q switched doubled Yags?

[Junktronix]

I've got about 2000 sqft of 'junk' of which maybe 10% is listed on eBay at any given time.

The mini LS machines are lamp pumped with a 3" arc length and a smaller diameter YAG rod, but the laser deck looks remarkable similar to the big 80W. They have a tiny water/air cooler built-in which is probably not suitable for running full power for any length of time. I think they are rated 10W at the 'vag' end (though I think these were sold as skin treatment rather than surgical machines), but have 'StarPulse' which claims 160W. Likely only for 1 pulse or something. These use the Analog Modules 591A arc lamp supplies which are reasonably well documented, though I have never hotwired one of them. I would need to get around a kilobuck per machine. I also have a couple very similar units which are Erbium YAG @ 2940nm.

You must have a pretty impressive inventory to incidentally find a couple of these gathering dust. I am interested in the "mini" versions. Are they lamp pumped, Q switched doubled Yags?