2.5w Able Laser has arrived!
Decided to start a new thread that wasn't so deep.
Received the new laser today!
Walked the wife through every step and check on the phone.
Findings:
1. Laser aperture window has a magnetic metal protective cover. COOL!
2. Interlock Key is NOT removable in the ON position
3. Unit has 3 second delay from power on to emission.
4. Unit will not re-fire if the key is turned off then back on without a power cycle
5. Unit will not re-fire if the remote/estop is triggered without a power cycle
6. Unit has emissions led indicator on front pannel.
7. Unit has a mechanical shutter inside before galvos.
8. Unit will project ILDA 12k Test pattern almost perfectly at 30k with circle BARELY outside of the green box at 100% software height and width (the wife only has access to my quickshow, not beyond to test at 40k) Ill try to tweak it a bit when i get home to get it looking perfect.
9. Every Laser modulates beautifully
10. Laser came with a nice sturdy, quality, flight case
Money well spent. Good Job ABLE! Ill be uploading a slew of pics when i get home!
Specs.
2.5W
R:500mw/637nm
G:1w/532nm
B:1w/445nm
CNI diodes, 10khz analog modulation
R:＜1.0mrad divergence, 3mm diameter
G:＜1.0mrad divergence, 3mm diameter
B:＜1.2mrad divergence, 3mm diameter
DT40 pro scanners, scan speed is 40kpps, 60 scan angle
RJ45 network & ILDA DB25 in/out ports
Housing is sealed, dust-proof
N.W:10kgs, Dimension:309*226*191mm
"This is not "work". It's a disease, addiction and passion. Only slightly cheaper than cocaine, but similar effects."
-dnar
Reply With Quote
Originally Posted by wes702
