ThaNKS STEVE-- JUST WHAT I WAS SEEKING
BEYOND-FB3/APC40Mamba Black(clone & currently on loan) 2X 5paghetti & 2 I-Show 2X KGB 1000mW 532 DT40K (pair)XFX 1300 RGB full color RGB 30K DIY 3.5WRGB work in progress et al..assorted ttl chi-jectors--LOTS of LUMIA DIY pjs-
Powered by Pangolin
Former (2.5 yrs) ILDA Member- :-(
uncertified ILDA LSO -- dont ask
I would imagine the latest midi map image would be fairly representative of what's where...
http://www.pangolin.com/forums/showthread.php?t=1497
Frikkin Lasers
http://www.frikkinlasers.co.uk
You are using Bonetti's defense against me, ah?
I thought it fitting, considering the rocky terrain.
If you want to make your own you're unlikely to be able to get anywhere like the quality, as to do so will be very expensive unless you have a laser cutter as these are precision laser cut and printed with high quality wear resistent dyes, on a top quality substrate, ....the process isn't cheap even at quantity.
Last edited by White-Light; 05-13-2014 at 23:19.
I bought one from Pangolin direct. Shipping was same day and I really like it. It was 69 shipped. Makes using the controller SOOO much easier.
TY for the link and pics--hak
BEYOND-FB3/APC40Mamba Black(clone & currently on loan) 2X 5paghetti & 2 I-Show 2X KGB 1000mW 532 DT40K (pair)XFX 1300 RGB full color RGB 30K DIY 3.5WRGB work in progress et al..assorted ttl chi-jectors--LOTS of LUMIA DIY pjs-
Powered by Pangolin
Former (2.5 yrs) ILDA Member- :-(
uncertified ILDA LSO -- dont ask
That I was expecting--
I had an idea of getting something printed up where I could cut with scissors into strips to peel n stick under the buttons and knobs- much neater than hand written label or label printer. I know a guy who can make these- first would be expensive BUT if enough want one the cost would be much lower than $50-just not a cool--
Not saying the Pango skin is over priced- but for less quality I will save a few bucks--hak
BEYOND-FB3/APC40Mamba Black(clone & currently on loan) 2X 5paghetti & 2 I-Show 2X KGB 1000mW 532 DT40K (pair)XFX 1300 RGB full color RGB 30K DIY 3.5WRGB work in progress et al..assorted ttl chi-jectors--LOTS of LUMIA DIY pjs-
Powered by Pangolin
Former (2.5 yrs) ILDA Member- :-(
uncertified ILDA LSO -- dont ask