Glad it helped! Just make sure the amp is heatsinked as they do generate quite a bit of heat sometimes. In most cases the amps are isolated anyhow, so it's usually only the scanner block that needs to be lifted.
Senior Member
Glad it helped! Just make sure the amp is heatsinked as they do generate quite a bit of heat sometimes. In most cases the amps are isolated anyhow, so it's usually only the scanner block that needs to be lifted.
Senior Member
You might also see this video. What you're talking about is only mildly related, but the article and video may help:
https://www.youtube.com/watch?v=Vm0GISQi9fE
Senior Member
some great info in this thread-- subbing
BEYOND-FB3/APC40Mamba Black(clone & currently on loan) 2X 5paghetti & 2 I-Show 2X KGB 1000mW 532 DT40K (pair)XFX 1300 RGB full color RGB 30K DIY 3.5WRGB work in progress et al..assorted ttl chi-jectors--LOTS of LUMIA DIY pjs-
Powered by Pangolin
Former (2.5 yrs) ILDA Member- :-(
uncertified ILDA LSO -- dont ask
Senior Member
Again, you can subscribe to threads using the thread tools options, so you don't need to post
Frikkin Lasers
http://www.frikkinlasers.co.uk
You are using Bonetti's defense against me, ah?
I thought it fitting, considering the rocky terrain.
Posting Permissions
Reply With Quote