Results 1 to 6 of 6

Thread: Please help me with this logo!

  1. #1
    Join Date
    Nov 2014
    Posts
    2

    Default Please help me with this logo!

    My hearty greetings to all

    Im new to the field of laser show,I reques you all to help me with a logo I badly needed for my
    debut show .[ATTACH=CONFIG]45449
    followed by the text
    "SHREE VENKATESHWARA DRAMA SCENARY"
    i HAVE A 15KPPS RGB LASER 300MW

    my many thanks to you all awesome people in advance
    Attached Thumbnails Attached Thumbnails th (3).jpg  


  2. #2
    Join Date
    Mar 2012
    Location
    Akron, Ohio USA
    Posts
    2,197

    Default

    There is way to much detail in that image.
    Creator of LaserBoy!
    LaserBoy is free and runs in Windows, MacOS and Linux (including Raspberry Pi!).
    Download LaserBoy!
    YouTube Tutorials
    Ask me about my LaserBoy Correction Amp Kit for sale!
    All software has a learning curve usually proportional to its capabilities and unique features. Pointing with a mouse is in no way easier than tapping a key.

  3. #3
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,753

    Default

    If you took 2/3 of the sun rays out, removed the concentric circles that are in the center of the sun, took the all dots out of the entire image and took out some of the detail from the smaller circles below the tower, you might have a chance with some 30K galvos. Even with all that detail removed, 15K galvos are going to chug and give you a ton of flicker.

    It's been butchered but this is probably about the most detail you can expect a projector to perform:
    Click image for larger version. 

Name:	th (3).jpg 
Views:	14 
Size:	19.6 KB 
ID:	45451

    Even then, 15K galvos are going to flicker a lot
    Last edited by absolom7691; 11-21-2014 at 11:09.
    If you're the smartest person in the room, then you're in the wrong room.

  4. #4
    Join Date
    Apr 2008
    Location
    Amsterdam, NL
    Posts
    2,098

    Default

    or buy 3 more projectors and divide this picture over the porjectors

  5. #5
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,314

    Default

    You could scan this with 2 projectors running at 30kpps or 1 projector with scanners that are ment to run at 60kpps~50kpps and heavy optimizing.
    That is if you have CTHP laser scanners tuned at 60kpps or the Eyemagic scanners or the ??506 scanners by pangolin tuned at 40~50kpps??

    Anyhow with 15kpps even I can't help you.

  6. #6
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Plus with a single projector, the text would have to be displayed separately - maybe the logo for X seconds, then scrolling text and back to the logo etc in a loop.

    Absolutely no chance of displaying all that text on its own in one go, never mind the logo.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •