Results 1 to 4 of 4

Thread: Transcension DMX Operator 2 Controller, laser

  1. #1
    Join Date
    Mar 2012
    Location
    wales
    Posts
    14

    Default Transcension DMX Operator 2 Controller, laser

    will the Transcension DMX Operator 2 Controller let me control lasers ie my kam rgb 350 and an equinox kamikaze

  2. #2
    Join Date
    Nov 2011
    Location
    Bedfordshire, UK
    Posts
    603

    Default

    Hmmm.... yes. Probably... but badly and not in any really useable way...

    I don't know the model specifics of your lasers, but dmx control usually is limited to on,off, bigger, smaller, change pattern and maybe some colour controls...

    Don't expect too much and you won't be disappointed.

    Imo, I'd save your money for parts to build an ILDA controlled laser and some decent DAC+software rather than going the dmx route... but that's just my opinion
    If in doubt... Give it a clout?

  3. #3
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,212

    Default

    Also, using a 60mm fader to select patterns that cover 2 out of 256 values is a hit or miss affair
    http://www.facebook.com/SubsonicSystems
    http://www.frikkinlazors.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  4. #4
    Join Date
    Mar 2012
    Location
    wales
    Posts
    14

    Default

    thanks for replies, very helpful

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •