Results 1 to 3 of 3

Thread: XY2-100 communications protocol "industry standard"

  1. #1
    Join Date
    Jul 2015
    Posts
    2

    Default XY2-100 communications protocol "industry standard"

    Seeking information about the so called digital industry standard xy2-100. All we have found is the timing and pin out. Could anybody help me to find more information about the protocol?

    Thanks in advance.

  2. #2
    Join Date
    Oct 2012
    Location
    Carver, MA.
    Posts
    189

    Default

    Hello,

    Here are a couple documents to get you started:

    http://www.newson.be/files/TD_XY2-100_R0703.pdf

    http://www.camtech.com/downloads/cus...nual_rev_c.pdf

    The first explains most of what you need, but the command word table is incomplete. You can find more command word info in the second PDF.

    Hope this is helpful.

    ED

  3. #3
    Join Date
    Jul 2015
    Posts
    2

    Default Many thanks

    I had the first document, but... yes, it was incomplete.

    Thanks a lot for your help.








    Quote Originally Posted by ekeefe View Post
    Hello,

    Here are a couple documents to get you started:

    http://www.newson.be/files/TD_XY2-100_R0703.pdf

    http://www.camtech.com/downloads/cus...nual_rev_c.pdf

    The first explains most of what you need, but the command word table is incomplete. You can find more command word info in the second PDF.

    Hope this is helpful.

    ED

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •