Any info on CT 6600HPs?

[platinum]

These are large-mirror galvos for a LaserNet CuBr I'm tinkering with.

I'm trying to figure out their specs so I don't piss them off. Going to stick with 10K PPS and 25% output size, for now, until I know better.

Couldn't find anything on the Cambridge site, and they're closed until Monday.

- Jonathan

[dsli_jon]

..these?

http://www.cambridgetechnology.com/i...raw&Itemid=123

http://www.cambridgetechnology.com/i...raw&Itemid=123

(..if those linx don't work, go here: http://www.cambridgetechnology.com/i...orm&Itemid=123 ..Type in "6650" - should be the same 'family'... Next-closest are http://www.cambridgetechnology.com/i...=81&Itemid=123 IIRC..

..This is why we need the Wiki back, Herr Admin! *coff coff* I had a 'deep-level CT docu-repository link' not found on their Home Page / search engine.. Stumbled on it one time, and it was a Goldmine. Dunno if it still works, since we can't access the PL-wiki.. :/

Hope this helps.
j

[platinum]

Those look like completely different scanners..


Here are a couple of photos:

[dsli_jon]

Sorry.. You asked for 6600s.. Those pics look like straight-up 6800s w/ large mirrs.. not even 6850s / 70s / 80s (usually the ones for using wongo-sized mirrs, vs 6800s..) What am I missing, here? :confucious:

If they are / you are, indeed, looking for 6800s - vs 66xx - then go here: http://www.cambridgetechnology.com/i...orm&Itemid=123 ..use "6800" as the search term, and you shall find all the Docs you (should) need..

Again, hope that helps..
j

[mixedgas]

Let me do some digging, those were a early, modified semi-stock unit for some special customers.. I have electrical specs for them, but not much on performance..

Have you tried contacting CambTech sales verbally.,...

Steve

[platinum]

Got it handled. Thanks!