Page 4 of 4 FirstFirst 1234
Results 31 to 35 of 35

Thread: Ether Dream 2

  1. #31
    Join Date
    Feb 2018
    Location
    VA <-> NYC
    Posts
    5

    Default

    @j4cbo - Another quick question in addition to the static IP question. Is there comprehensive documentation that replaces the etherdream 1 online docs? I'm interested in knowing what the status codes are that the etherdream is returning - Specifically response codes 73 & 97 during some glitches, I'm assuming I'm not filling the buffer enough at times. Thanks! So far running smoothly with 4x Etherdreams on a gigabit switch!

  2. #32

    Default

    Is there comprehensive documentation that replaces the etherdream 1 online docs? I'm interested in knowing what the status codes are that the etherdream is returning - Specifically response codes 73 & 97 during some glitches
    The protocol has not changed. The page is kind of buried, but the response codes are here. Note, they are all given in hex values and your values above appear to be decimal.

    https://ether-dream.com/protocol.html

  3. #33

    Default

    Where's the source code for the ED2 firmware? There's a download page that links to the source, but that has a big notice saying it only applies to EtherDream 1 and links to the new site. But on the new site I only see a binary download. And the latest ED2 firmware is dated March 10, 2018, but the Github repo hasn't been updated nearly that recently.

  4. #34

    Default

    Hello. A week ago I bought an EtherDream 2 controller in Innolasers. I synchronized DAC with LSX Basic, it works well. Then he put Etherdream-tools, it works well too. UDP port 7654 is opened.

    The question is: my projector should work on the street, on the electric lighting support, so I have to run ild files automatically, from the memory card.

    What I did: prepared a memory card 8g., Class 10, fat32. We downloaded ild files onto this card (I tried the format 0 1 and 4 5). Created autoplay.txt :
    / ilda / pps 30000
    / ilda / fps 30
    / geom / size 0.3
    / geom / offset 0.4 -0.2
    / ilda / play file.ild

    Unfortunately, automatic playback does not start. I also tried to send OSC commands (/ ilda / n / play, / ilda / repeat 1). The controller does not respond to OSC commands from the console. Running the show also does not happen.

    Help please understand this problem, the authorities swear, the deadlines are tightening. I need to make it so that I can run the show automatically, via the autoplay.txt file

    Thank you in advance for your cooperation.

  5. #35

    Default

    Try removing the spaces in the osc addresses like this:

    /ilda/pps 30000
    /ilda/fps 30
    /geom/size 0.3
    /geom/offset 0.4 -0.2
    /ilda/play file.ild

    Also:
    The Ether Dream listens for OSC messages on UDP port 60000. When it sends a response to a message, it will send that response to port 60001 on the originating host.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •