Page 20 of 22 FirstFirst ... 1016171819202122 LastLast
Results 191 to 200 of 212

Thread: Some gears and testing for laser-ablating and -marking ...

  1. #191
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    @swamidog - here one of my videos with "loud" metal ablating at 1.5kHz -- https://www.youtube.com/watch?v=grxHPJiiWnI&t=37s

    Viktor
    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  2. #192
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... Christmas is over, we're heading for Easter -- but here's something for next Christmas ... scanned a "Brussels lace" window tag from my wife and lasered it (scaled down) from a 0.2mm aluminum card:

    https://www.youtube.com/watch?v=E_iM...ature=youtu.be

    Viktor
    Attached Thumbnails Attached Thumbnails Spitze.jpg  

    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  3. #193
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... got an request from a former customer - but now another laser, so first tried whether I get similar results with it -- it's a 30Watt fiberlaser (instead of the previous 20Watt), but in the range below 40kHz it can't perform this special "super-hot" mode ... so with other settings also different results ... but works too

    https://www.youtube.com/watch?v=rTfd...ature=youtu.be

    Viktor
    Attached Thumbnails Attached Thumbnails Outgym1.jpg  

    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  4. #194
    swamidog's Avatar
    swamidog is online now Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,752

    Default

    here's a little work i did with my fiber laser.

    Click image for larger version. 

Name:	rad-med-02.jpg 
Views:	5 
Size:	4.00 MB 
ID:	57609
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  5. #195
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... nice job!

    Viktor
    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  6. #196
    Join Date
    Mar 2010
    Posts
    581

    Default

    rocket logo cycloid
    Attached Thumbnails Attached Thumbnails rocket_logo.png  


  7. #197
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... here some "vintage" tags made from 0.3mm brass

    ​​https://youtu.be/LnFwteeqoQE

    Viktor
    Attached Thumbnails Attached Thumbnails Alfred Böttcher - 0_3mm Messing 1.jpg  

    Alfred Böttcher - 0_3mm Messing 2.jpg  

    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  8. #198
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... tried "deep engraving" in slate today -- here on 100x100mm slate tiles - left 1 pass, right 20x (just under 15 minutes):

    Viktor
    Attached Thumbnails Attached Thumbnails Aztek-Innen-Schiefer.jpg  

    Aztek-Innen-Schiefer_detail.jpg  

    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  9. #199
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... here the video for the slate-engraving -- https://www.youtube.com/watch?v=eHhM...ature=youtu.be

    Viktor
    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

  10. #200
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... for an (ex-) customer request for yesterday I was "forced" to extend my fiber laser by an additional "endless" X-axis for engraving punching strips (have lasered approx. 30m).

    The stepper driver can be seen in the rear compartment at the bottom left - for the time being I fixed it "provisionally" to the aluminum plate with double-sided tape (will probably stay in forever ).


    So far, with two manual stops, I've only been able to cut and engrave up to the size of the small 150mm hooked liner - but I would have liked to be able to cut-engrave the 300mm steel liner as well.


    Then I searched my basement for free linear axes -- the one in the back has 300mm travel, the long spindle 500mm - I'll test it next time

    Viktor
    Attached Thumbnails Attached Thumbnails zusaetzliche X-Achse - 1.jpg  

    zusaetzliche X-Achse - 2.jpg  

    zusaetzliche X-Achse - 3.jpg  

    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •