Originally Posted by
jors
Thanks Lari! Yes hehe, sun..why not
Yes, maybe a bit, brass is clean when bond breaks, however I sand the brass before...
~
Take a look at Norland, I had good luck with one of theirs a few years ago. I'm not sure I'd use a led for cure, not enough ergs per cm^2 unless you have a very big LED. I liked UV Ion laser at 356 nm or a mercury arc lamp for the curing.
~
If you need ultra low outgas, consider Hysol 1C white epoxy or Torrseal... But remember that once that cures, you will ruin the mount before removing the optic.
Steve
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...