Abstract Editor
Channel 1, 2, and 3 produce a frequency of a given waveshape. The X&Y of each channel are 90 degrees out of phase. What is the easiest way to make Channel 1's X&Y 90 or 270 degrees out of phase with Channel 2? Doing so with the Freq. properties doesn't seem to have any effect.
I did this with my analog PLL lissajous console and Apple digital image cards. When using channel frequency ratios of 2:3, 3:5, 7:10, and their multiples (4:6, 6:10, etc.) for higher speeds by shifting one of the Channels 90 deg. or 180 deg. or 270 deg. brought about pedaled flowers with mixing ration of 100:100 or pointed stars at 100:50 or visa versa. Choosing to modulate the Channels simultaneously or individually resulted in harmonic shapes.
________________________________
Everything depends on everything else