2.65 VAC nominal 75 watt Cathode, with cathode cold start surges probably in the 50 amp region or more. Lexel would have adjusted the cathode supply for 2.65 volts using transformer taps.
I max 10 amps.
I'll see if I have pinout data but no promises. Should be very similar to a LEXEL 88 as documented in SAM's FAQ, with the addition of fan wires and change of interlock pins.
Tube voltage data is in deep storage, may take a while as I'm at work.
Two fans of 350 CFM. Air exits the top of the head. Rods are Super Invar.
Do NOT accidentally connect to the vacuum getter pin if installed.
Steve
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...