This is a bit of a feeler.
Here is a DMX board i have been using in burst boxes I have in my hire stock for a few years now. I have 10 kits pretty much ready to go. If they are popular, I will make a lot more.
The board has a white OLED display, NV storage of DMX channel and hard output limit.
There are outputs for RGB lasers, and on-board motor driver capable of DMX control of speed - slow to fast speed in both directions. Also, there are 2 3.3v TTL outputs with a DMX channel to control each output - these could be used to drive actuators
Kit contains the 2 PCB's and a slow rotating burst grating. All you will need to add is a power supply, a laser source and house it in a suitable box.
Looking at $150AUD per kit