Please see attached photos.
YOU have about 30 seconds after It starts to get the lid on. Once it starts, if it starts, give it a good 2-3 hours of running without shutting down.
`
You want to gently spark near the white ceramic tube body at the fin / ceramic weld. Not on the cathode end bell, but the fins inside or at the cathode side of the cooling fin box.
~
Do not spark the cathode lead on a ALC product. The spark should arc toward the cooling box. You can also try the same spot at the anode end. Warning high voltage at many,many amps is preset inside the head. Be careful. Keep the sparks off the light sensor card inside the head, the little 2n2222A transistor and the op-amp cannot take a hit.
~
Steve
Last edited by mixedgas; 06-04-2018 at 08:42.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...