The green laser has 6 wires!
See pics. After testing voltage, I was unable to determine the functionality of each of the black wires in reference to the red wire. I'm looking to try to troubleshoot the main control board or the diode itself red and blue diodes work fine. Also note that the fan for the green diode was dead... when measured with meter it only reads 1.6 volts compared to the expected voltage of 12v. Blue laser is measured 12v for the fan and is getting a pwm like variable voltage with the red wire being always positive. The two red lasers work as expected.
Having a hard time to figure out the 6 wired on the green diode... if its possible to replace and how to determine if that's necessary. Contacted vendor who could not offer any help. Any advice from the professionals on this forum would be very helpful and appreciated. I have enclosed some photos to show the connection as well as the board. If u may wish to contact me for Info please do so here or at jack.maksymenko@gmail.com
Thank u guys for keep this forum amazing! And helping out all the lil guys who dont have any local laser legends to assist us. I'm happy to have someone to ask these questions to. Much love!!