Results 1 to 5 of 5

Thread: Window broken - modell Laserworld CS-2000 RGB

  1. #1
    Join Date
    Nov 2018
    Posts
    2

    Default Window broken - modell Laserworld CS-2000 RGB

    Hi,

    The glas is broken on our laser, modell Laserworld CS-2000 RGB.
    I can't find the dimensions of the glas.

    Also, is it possible to use plastic?

    Regards
    Mark
    Last edited by markin; 11-29-2018 at 04:18.

  2. #2
    Join Date
    Nov 2018
    Posts
    2

    Default

    I haven't the laser in my hands atm. So I can't measure it myself.
    Hoping someone can help me get the dimensions of the glas window.

  3. #3
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,488,599

    Default

    Pretty sure the aperture on those projectors is ~ 2 inches square. Since the aperture glass attaches to the inside of the front panel, there's no harm in going with a larger piece (within reason). I would think you'd be safe with a 2.5 inch square piece. Just glue it in place with some 2-part epoxy and you'll be fine.

    You can use plastic, but I wouldn't recommend it. Anti-reflection coated glass is what you want. Edmunds Optics sells it in various sizes.

    Adam

  4. #4
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,110

    Default

    you need to use AR glass.. Have a lookie here: https://shop.stanwaxlaser.co.uk/ar-w...-x-3-586-p.asp
    another place would be edmund optics .. it all depends on where you are located.
    Make sure it matches your apperature hole dimensions.. larger is fine as and you can always score cut it.. just use epoxy to glue it on the inside.. good luck!

  5. #5
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,488,599

    Default

    I totally forgot about Stanwax's shop! His prices on Anti-reflection glass are *way* better than what you'll find on Edmund Optics' site.

    Adam

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •