Results 1 to 2 of 2

Thread: Can someone identify this driver? (CNI Laser OEM type)

  1. #1
    Join Date
    Aug 2015
    Posts
    28

    Default Can someone identify this driver? (CNI Laser OEM type)

    Hello, I need your help with a driver I found.

    Can someone tell me what's the maximum current output of this driver, and which potentiometers regulate what? I wanted to use it with Jenlas D2 as long as it can manage ~20A of current (looks beefy enough but I dont know its parameters). Thanks in advance! Photo attached. Also pinout of this connector in low right would be very helpful!
    Attached Thumbnails Attached Thumbnails 20190118_210336.jpg  


  2. #2
    Join Date
    Dec 2007
    Location
    Denmark
    Posts
    115

    Laser Warning driver

    Hi.
    Know this driver from CNI. It's used in a the older Green 1-1.5w heads, it's the only ones i have seen it with. So current around max. 5 amps.
    For a jenlas D2 or equle you need a ~20-25A driver + dual H-bridge (heat+cool) TEC driver, to make it good stable power. The CNI driver is not a heat and cool version.
    There are sevel types of driver around. I have alot of the HB ones made for Jenlas and coherent sources. But whey was not cheap ones. think they was around 2K Euros pr. pcs.
    To take a look at OPT-laser in poland think he can help you in the high current and Heat and cool TEC driver also.

    Greetings
    Poul.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •