can someone link me up to tec drivers?
after a driver that will heat/cool to reach its pre-set temp
can someone link me up to tec drivers?
after a driver that will heat/cool to reach its pre-set temp
Eat Sleep Lase Repeat
Hi!
We have fullbridge TEC Drivers : 25V max and 5A for a 10k NTC
Attached a picture!
BR
Phillip
Last edited by Phritzler; 06-16-2020 at 10:30.
Hey
The size is 73x32mm
If you need more power, you can use them as TEC booster and simply connect it parallel with just one ntc (via our colorbus system)
We have a newer smaller version now , which is working up to 50V, has half the size and 5A - but the price is higher.
The TecDrive cost about 66€ as single unit, at QTY higher than 10pcs we can talk about pricing...
Soon I will post our new colordrive range ...
Attached a picture of our new 3/6ch driver (beside our actual 1ch Colordrive) :
The data is not fixed yet, we´re still working on optimizing...
>2MHz -3dB Analogue modulation, differential input, 5A 50V 3CH or 2,5A 50V 6Channel, fullbridge tec, a lot of more features...
Sure each diode channel has a DCDC. The efficiency of the driver is about 95-96% if you adjust it right...
Rise and Falltime will be about 220/180ns!
Its 93x46mm....
The trimmers are on the backside, even the cooling and other components...
We will use just one driver with 2 extra tec boosters for our KORE performance series up to 40W...
BR,
Phillip
Last edited by Phritzler; 06-16-2020 at 10:30.
I only need to run a small 10x15mm tec, don't have the spec to hand.
I need 4 with shipping to uk
Eat Sleep Lase Repeat
Just standard 12v
No vat just private
Eat Sleep Lase Repeat
I was going to order these but out of stock
https://optlasers.com/tec-controller...ure-controller
Eat Sleep Lase Repeat
Hello!
Soon I will get you new informations. I will do a new post here if the new range of drivers is finished.
At all, the estimated Price of the 3ch will be round about 290€
BR,
Phillip