Results 1 to 5 of 5

Thread: Pangolin FB4 OLED Display

  1. #1
    Join Date
    Jun 2008
    Location
    Germany
    Posts
    50

    Default Pangolin FB4 OLED Display

    Hi,

    i have a brocken OLED display on one of my FB4s. Does anybody know what display is used and might be where to buy.

    Thanks in advance

    Thomas

  2. #2
    Join Date
    Dec 2007
    Location
    Denmark
    Posts
    106

    Default

    Quote Originally Posted by ThomasF View Post
    Hi,

    i have a brocken OLED display on one of my FB4s. Does anybody know what display is used and might be where to buy.

    Thanks in advance

    Thomas
    Contact Ante at Pangolin. He designed it. :-)

  3. #3
    Join Date
    Aug 2013
    Posts
    39

    Default

    Pangolin should definitely be able to help you out. There's a hardware repair request form here: https://pangolin.com/pages/returns

    Even if you could get a replacement display somewhere else (it may be custom), you won't be able to replace it without destroying the overlay. It's possible that reseating the FPC connector that attaches the display to the PCB will get it working again, but this is fiddly, because the flex out of the LCD and the connector are both fragile (just the nature of FPC) and tricky to get to, so it must be done VERY carefully to avoid turning this into an even more expensive repair!

  4. #4
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,134

    Default

    if it still works leave it alone.

  5. #5
    Join Date
    Jun 2008
    Location
    Germany
    Posts
    50

    Default

    Thanks for your replays! Iíll contact pangolin or lleave it as it is.

    Thomas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •