Results 1 to 9 of 9

Thread: Cni 5 watt 532nm oem laser module

  1. #1
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,236

    Default Cni 5 watt 532nm oem laser module

    Selling a 5 watt cni oem 532nm laser module complete with driver.
    I removed this because it was low power, so sale "as is", maybe good for repair/ parts or research.
    Unit was originally installed in a lightspace rgb laser, with around a couple hundred hours of use.

    All offers accepted, just trying to get rid of stuff i'm not using or not time to diagnose.

    Pm with offers.


    Thanks,
    carlos
    Attached Thumbnails Attached Thumbnails cni1.jpg  

    cni2.jpg  

    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  2. #2
    Join Date
    Aug 2015
    Posts
    27

    Default

    Still got it? Even if it's totally dead I could use the driver

  3. #3
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,236

    Default

    Still available, where are you located?
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  4. #4
    Join Date
    Aug 2015
    Posts
    27

    Default

    Quote Originally Posted by carlos3621 View Post
    Still available, where are you located?
    Poland

    PM me about that item

  5. #5
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,236

    Default

    I recently got a quote for shipping overseas, and itís crazy expensive,
    Local buyer preferred unless you REALLY want it, just the shipping alone was close to 280 USD
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  6. #6
    Join Date
    Aug 2015
    Posts
    27

    Default

    Shipping quotes from US are always totally absurd - its not really hard to find MUCH cheaper (albeit much slower) option, eg. overseas. For example I was routinely sending 100g envelope-parcels to US for like $12. If it's still too heavy to be reasonably shipped I'd be interested in driver board only - it'd probably work fine with my Jenlas. Driver would be easy to send in a standard envelope (dont need PSU cause it's really easy to find a replacement as long as I know V and I values)

  7. #7
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,236

    Default

    Quote Originally Posted by celas View Post
    Shipping quotes from US are always totally absurd - its not really hard to find MUCH cheaper (albeit much slower) option, eg. overseas. For example I was routinely sending 100g envelope-parcels to US for like $12. If it's still too heavy to be reasonably shipped I'd be interested in driver board only - it'd probably work fine with my Jenlas. Driver would be easy to send in a standard envelope (dont need PSU cause it's really easy to find a replacement as long as I know V and I values)
    Ok, let me get a quote on the driver shipping costs, will let you know asap.

    thanks,
    carlos
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

  8. #8
    Join Date
    Aug 2015
    Posts
    27

    Default

    So? Got the estimated price?

  9. #9
    Join Date
    Dec 2007
    Location
    The West
    Posts
    1,236

    Default

    Hi sorry Iíve been busy, but I will check with DHL tomorrow

    thanks,
    carlos
    RGB laser projectors
    Pangolin Beyond .NET
    APC40 Midi controllers
    Pangolin FB3 controllers
    DZ splitter
    LS MegaWatt Green Machine

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •