Page 7 of 105 FirstFirst ... 3456789101117 ... LastLast
Results 61 to 70 of 1045

Thread: CYGN-B

  1. #61
    Join Date
    Jun 2009
    Location
    St. Louis, MO
    Posts
    1,299

    Default

    I'm pretty sure what's pictured is a sin/cosine pot, and yes they're continuous rotation. Most potentiometers have stops, but it's not a requirement. Perhaps the stepped effect was the result of the rotation circuit's design. I've thought about introducing a sample and hold on a joystick signal for a similar effect...
    "Bad art is a great deal worse than no art at all." - Oscar Wilde

  2. #62
    Join Date
    Mar 2010
    Posts
    745

    Default

    You're right. I just learned there is such thing. It's this:

    https://www.ebay.ph/itm/Potentiomete...0/293190383319
    Attached Images Attached Images

  3. #63
    Join Date
    Mar 2010
    Posts
    745

    Default

    sinusoidal modulation signals
    Attached Images Attached Images

  4. #64
    Join Date
    Mar 2010
    Posts
    745

    Default

    I archived this a few years ago (written by Brian?):

    Most of the circuit boards in Laser Images' equipment had 4 letter acronyms. The Digital Offset Generator board's was shortened to three. Calling it the DOG card may have simply followed in the great tradition of D-PIG card. It could do several images per scanner as well as static and dynamic offsets. The popcorn effect produced by earlier equipment suffered in existing shows due to the connection of offset gain to the DOG card's multiplying DACs. The DOG card was limited by it's small memory 2k? of RAM, 2k? of ROM. This was a function of board space since in addition to memory a 6502 cpu, glue chips, and 8 D/A converters had to fit on a "standard" Vector wirewrap board. (That's about 4 x 5 inches of board space.)

  5. #65
    Join Date
    Mar 2010
    Posts
    745

    Default

    About that ROM...

  6. #66
    Join Date
    Jun 2009
    Location
    St. Louis, MO
    Posts
    1,299

    Default

    I should have mentioned that since the amplitude modulation was done by varing the supply voltage to the 74c chips the amplitude modulation voltage couldn't go below +3 volts. You've got a +/- thing going on there. It's nice, but it'll keep you from doing the old images when the AM is all the way up.
    "Bad art is a great deal worse than no art at all." - Oscar Wilde

  7. #67
    Join Date
    Mar 2010
    Posts
    745

    Default

    Ahhh... I wondered about that.

  8. #68
    Join Date
    Mar 2010
    Posts
    745

    Default

    Pay attention to Ron's list of things an offset generator should do, all ye console builders:

    This card also allowed shapes to "pong" around and "fly" around (can't think of a term for this motion - kinda swooping slow lissajous motion). and fly from the center to a random point outside. It also generated some beautiful digital shapes

  9. #69
    Join Date
    Jun 2009
    Location
    St. Louis, MO
    Posts
    1,299

    Default

    There were a bunch of ROMs (actually UV-EPROMS) - pretty much a set for each major show early on.) At some point as higher density EPROM became available some of the boards were modified for at least 8 shows selected with a small rotary switch - if memory serves.
    "Bad art is a great deal worse than no art at all." - Oscar Wilde

  10. #70
    Join Date
    Mar 2010
    Posts
    745

    Default

    I think maybe the "fly" motion appeared in the number "Duchess".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •