Sincerely,
Ryan Smith
ScannerMAX Mechanical Engineer
ryan {at} scannermax.com
Here's one of my original mixed meter pieces.
The drums on this one are one continuous take, no punch-ins.
See if you can count this one.
http://laserboy.org/stuff/Wheres_My_Grizzly_Bear.mp3
James.
Creator of LaserBoy!
LaserBoy is free and runs in Windows, MacOS and Linux (including Raspberry Pi!).
Download LaserBoy!
YouTube Tutorials
Ask me about my LaserBoy Correction Amp Kit for sale!
All software has a learning curve usually proportional to its capabilities and unique features. Pointing with a mouse is in no way easier than tapping a key.
Right thinking will be rewarded. Wrong thinking with be punished.
4cyl pushing a whole 95hp!
Ignored the doctors orders and got the motor/trans/tcase out... not in too much pain and feel pretty accomplished. Only concern is that I was at the max height of the hoist pulling this one (because I did all 3 pieces), and its a stock truck. The next one I'm doing has 4.5" of lift and 6" taller tires than stock. might have to take the front tires off and have the rotors sitting on wood blocks to give myself a fighting chance...
Sincerely,
Ryan Smith
ScannerMAX Mechanical Engineer
ryan {at} scannermax.com
I removed the transmission from my 4.0L before from my Jeep. Just getting the two to separate was the hardest part of the entire replacement. I thought about doing it your way but didn't want to remove the grill.
95HP is pretty respectable for something that size.
Yea, cars in the front yard is usually frowned upon, even in Florida.