Results 1 to 7 of 7

Thread: Need a manual and cabling diagram for IPG Laser. PYL-60 with driver.

  1. #1
    Join Date
    Jun 2012
    Location
    Mainland China
    Posts
    38

    Default Need a manual and cabling diagram for IPG Laser. PYL-60 with driver.

    Need some help on an item purchased used. This is an IPG fiber laser model PYL-60 and a laser driver. This laser may be a 60 watt CW laser. I also have a used diode PLD-6-4.

    It would be great to power on and test. No cables came with this laser and no manual. Any help or suggestions are greatly appreciated.

    Click image for larger version. 

Name:	photo 1.JPG 
Views:	46 
Size:	127.6 KB 
ID:	42534

    Click image for larger version. 

Name:	photo 2.JPG 
Views:	42 
Size:	113.9 KB 
ID:	42535

    Click image for larger version. 

Name:	photo 3.JPG 
Views:	42 
Size:	130.9 KB 
ID:	42536

    Click image for larger version. 

Name:	photo 4.JPG 
Views:	43 
Size:	125.9 KB 
ID:	42537

    Click image for larger version. 

Name:	photo 5.JPG 
Views:	47 
Size:	101.7 KB 
ID:	42538

    Click image for larger version. 

Name:	1.JPG 
Views:	24 
Size:	210.9 KB 
ID:	42539

    Click image for larger version. 

Name:	2.JPG 
Views:	19 
Size:	242.9 KB 
ID:	42540

    Click image for larger version. 

Name:	3.JPG 
Views:	17 
Size:	258.2 KB 
ID:	42541

    Click image for larger version. 

Name:	5.JPG 
Views:	12 
Size:	289.8 KB 
ID:	42542

  2. #2
    Join Date
    Jun 2013
    Posts
    3

    Default

    Did you try to contact IPG? They would be the place where you could get your questions answered.

  3. #3
    Join Date
    Jan 2015
    Posts
    1

    Default

    Did you have any luck? i have this PYL-10M and a similar driver, i believe the cable is just strait... pin 1 to pin 1 and so on, i could get some info on the led display like hours, but it still can't fire the beam, i'm missing something, could find manual online, ANYONE? please?
    Thank you

  4. #4
    Join Date
    Feb 2019
    Posts
    91

    Default

    i have also a pyl-50m without puwer supply and searching manual/pinout

  5. #5
    Join Date
    Feb 2019
    Posts
    91

    Default

    Some photos from inside..
    It has 28 diodes
    What is +LD1(pins 10-11) +LD2 (pins 12-13) ?
    1-2-3-4 pins is GND

    7-9 pins seem some control signals..

    outside label write 31VDC
    Attached Thumbnails Attached Thumbnails IMG_20200804_063241.jpg  

    IMG_20200804_063245.jpg  

    IMG_20200804_063249.jpg  

    IMG_20200804_063312.jpg  

    IMG_20200804_063401.jpg  

    IMG_20200804_063439.jpg  


  6. #6
    Join Date
    Jan 2023
    Posts
    1

    Default

    Quote Originally Posted by javanam View Post
    Some photos from inside..
    It has 28 diodes
    What is +LD1(pins 10-11) +LD2 (pins 12-13) ?
    1-2-3-4 pins is GND

    7-9 pins seem some control signals..

    outside label write 31VDC
    Were you able to make it work ? Any progress ?

  7. #7
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,478

    Default

    ... ich this is a CW- or QCW-type, then the diodes are wired in two serial banks -- I have a 130Watt CW with broken elektronics and simply connected one of the banks and could "revoke" the laser with same quality by giving power to it - didn't seem different compared to another one, I have in working condition ...

    Viktor
    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •