Results 1 to 4 of 4

Thread: Feeler: Diode mount

  1. #1
    Join Date
    Jul 2006
    Location
    Belgium
    Posts
    293

    Default Feeler: Diode mount

    Since I have been building lasers I always thought that diode mounts missed something. Some one can be fixed from below, some allow the diode to rotate to find the sweet spot when using prisms or cylindricals, ....
    So I thought to try and design a mount that overcomes some of those disadvantages.
    I now have a design that seems ok for me:

    Click image for larger version. 

Name:	combined_2021-Feb-20_06-20-41PM-000_CustomizedView2859520189.png 
Views:	2 
Size:	227.3 KB 
ID:	57659

    All made out of 6061 alu and natural color anodised. On top you can put 2 M3 screws to fix the mount to a base plate. The third screw on top is to fix and secure the M9x0.5 lens when the sweet spot has been found.
    On the back you have a plate that holds the diode and that can rotate a bit. This plate is secured with 2 M2 screws.
    Beam height from the mount is 15mm. This allows to mount it on a 10mm alu plate and have a 4mm TEC underneeth to get 29mm final beam height.
    The block is 20mm wide, 12mm deep and 26mm heigh.

    Click image for larger version. 

Name:	combined_2021-Feb-20_06-23-52PM-000_CustomizedView8404377597.png 
Views:	5 
Size:	316.2 KB 
ID:	57660

    I mailed around to have some prices for manufacturing this in small quantities.
    My first impressions are that I could make these to sell for around 25euro a piece.
    I would make them for 9mm diodes first and maybe later on for 5.6mm.

    Would there be interest for such a mount?
    Last edited by jeejeedr; 02-20-2021 at 11:41. Reason: typo's
    Trying to create a good diode mount....

  2. #2
    Join Date
    Jul 2006
    Location
    Belgium
    Posts
    293

    Default

    Or if someone has tips or thoughts, those are also welcome.
    Trying to create a good diode mount....

  3. #3
    Join Date
    Sep 2016
    Location
    Belgium - Europe
    Posts
    11

    Default

    Looks nice. Did you make them?

  4. #4
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    1,311

    Default

    ... I'm using "standard" aluminium oder brass mounts in a bigger aluminium block for better handling the excess heat:

    Viktor
    Attached Thumbnails Attached Thumbnails Dioden-Aufnahme #4.jpg  

    Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426
    Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •