1 of your issues seems like the scan guard activating.
The other issue is a driver or scanner problem most likely.
both of these issues can be resolved with some fine tuning, id send them back where you purchased them for repairs.
You can also try adjusting the color delay settings within the software to see if that helps with the 2nd issue/ beams looking like they have wings...
Last edited by carlos3621; 05-07-2021 at 19:57.
RGB laser projectors
Pangolin Beyond .NET
APC40 Midi controllers
Pangolin FB3 controllers
DZ splitter
LS MegaWatt Green Machine