Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Omnichrome Umbilical

  1. #1
    Join Date
    Feb 2009
    Location
    East Coast of Southern Virginia
    Posts
    444

    Default Omnichrome Umbilical

    I am looking for an umbilical / head power cable for an Omnichrome 532/543. I believe also an ALC 60X or Melles Griot Argon air cooled argon power supply to laser head cable will work as well. Preferably one with all the pins populated.

    In case you do not know what it looks like. It fits this connector:

    Click image for larger version. 

Name:	Omnichrome Umbilical Connector.png 
Views:	33 
Size:	50.0 KB 
ID:	58136
    Last edited by cfavreau; 07-15-2021 at 07:28.

  2. #2
    mixedgas's Avatar
    mixedgas is online now Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,543

    Default

    There is a three pin (or more) difference in the connectors between 110V and 220V lasers. Interchangeable cables have ALL pins populated. Otherwise the wiring is straight through. There are some cables out there that are not totally populated.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  3. #3
    Join Date
    Feb 2009
    Location
    East Coast of Southern Virginia
    Posts
    444

    Default

    Good to know and Thanks very much for the information!

  4. #4
    Join Date
    Feb 2009
    Location
    East Coast of Southern Virginia
    Posts
    444

    Default

    I found this handy pinout on the LaserFX site:

    http://www.laserfx.com/Backstage.Las.../Pinouts1.html

  5. #5
    Join Date
    Apr 2012
    Location
    Beaverton, OR
    Posts
    284

    Default

    I have one somewhere. Ill look around.

  6. #6
    Join Date
    Feb 2009
    Location
    East Coast of Southern Virginia
    Posts
    444

    Default

    Quote Originally Posted by macona View Post
    I have one somewhere. Ill look around.
    Thanks, very much appreciated!

  7. #7
    Join Date
    Apr 2012
    Location
    Beaverton, OR
    Posts
    284

    Default

    Found it, it's a 10' cable. All pins so should work with your setup. Make me an offer I can't refuse.

    -Jerry
    Attached Thumbnails Attached Thumbnails IMG_1987.jpeg  


  8. #8
    Join Date
    Feb 2009
    Location
    East Coast of Southern Virginia
    Posts
    444

    Default

    $75 plus shipping. I have other various light show things to trade as well such as a 200mW RGB laser with TTL modulation, a set of 20k scanners, etc.

  9. #9
    Join Date
    Feb 2009
    Location
    East Coast of Southern Virginia
    Posts
    444

    Default

    Quote Originally Posted by macona View Post
    Found it, it's a 10' cable. All pins so should work with your setup. Make me an offer I can't refuse.

    -Jerry
    Are you going to be at SELEM? I gather from your info page that you are probably not.

  10. #10
    Join Date
    Apr 2012
    Location
    Beaverton, OR
    Posts
    284

    Default

    OK, thats fine. Let me get it packed up and PM me your address.

    I dont really have a whole lot of interest in light shows, mostly do the industrial stuff. Plus on wrong side of the country.

    -Jerry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •