Innova Ion and Misc Fiber Lasers (at my local surplus foo)

[Laser57]

Aha, I see it now. I didn't realize there was a page two to the thread. Interested, but price?

[sugeek]

Aha, I see it now. I didn't realize there was a page two to the thread. Interested, but price?

Clear as mud right, I pinged them for a price (if you want to contact them directly PM me and I will pass on the information).

[sugeek]

Aha, I see it now. I didn't realize there was a page two to the thread. Interested, but price?

It looks like he is asking $200/each on the 807.2nm fiber laser modules. I am tempted to pick one up and modify my co2 laser's gantry but I have enough other unfinished projects I should probably wait...

NE-c1821-f6
807.2 nm
21.1watt beam
29.2 amps
1.7 volts
Fiber coupled
30 units - NIB

[VDX]

... if you're interested in a "pure diode" laser as repalement/coop for a CO2 -- I've some IR-laserdiodes with 200Watt @40Amps, 975nm wavelength and 0,2mm spot size with a 50mm FL lens ... they're salvaged from broken multi-kW fiberlasers and can be found at ebay for around 500€ (two years before for 300€)

Viktor

[masterpj]

would so love that newport optical breadboard.

[sugeek]

would so love that newport optical breadboard.

I am waiting for a price list on those... I expect shipping costs could make it not worth it even if a great price. He is trying to downsize warehouse rentals so who knows what he ends up finding. I don't want to express interest in too much for fear it will end up in my garage but then again a picosecond laser might be useful for making photon sieve lumia wheels .

[masterpj]

I am waiting for a price list on those... I expect shipping costs could make it not worth it even if a great price. He is trying to downsize warehouse rentals so who knows what he ends up finding. I don't want to express interest in too much for fear it will end up in my garage but then again a picosecond laser might be useful for making photon sieve lumia wheels .

im expecting the same with regards to shipping.
I also actually need a specific size and not a large one.. and want one with metric threads (not imperial) so maybe not such a good idea!

Ill keep my eyes out for one local or within europe.

[sugeek]

im expecting the same with regards to shipping.
I also actually need a specific size and not a large one.. and want one with metric threads (not imperial) so maybe not such a good idea!

Ill keep my eyes out for one local or within europe.

I can see if any are metric but I suspect you are right... He did say he could get out the plasma cutter and make them smaller but that sounds like a sad thing to do.

[sugeek]

Newport breadboard
40 in x 36 in
M6 threaded holes
Oriel isolation frame
One Isolation is bad
Needs new ones installed
Ones in picture work but frame need mods to be used
Surface is 34.5 in high
$800

Newport On rotating table
Double sided breadboard
M6 threaded holes
29 in x 41 in
Square Hole is 10.25 x 6.25
Round hole is 1 in diameter
Table 66in long x 27 wide
Surface is 35 in high
$1650

Melted griot breadboard
Black frame with leveling feet
Not attached to frame
1/4-20 threaded holes
24 in x 48 in
Surface is 31.5 in high
$800

laser rails and misc hardware of unknown price (currently):
A mixture of melles groit , Newport, etc.
Two units have table brackets with short arm sticking out
Two without table bracket with long arm
Three with no bracket or arm




Sorry for the delay finally got an update on prices and a few more pictures. It does look like there is some non imperial stuff, nice to see! I will pass on the contact information to people interested just send me a PM.

Adam

[masterpj]

ah shame of the holes in the breadboards and the smaller one being imperial.