Results 1 to 4 of 4

Thread: Looking for 2x Green Modules

  1. #1
    Join Date
    Mar 2009
    Location
    New Orleans, LA USA
    Posts
    402

    Default Looking for 2x Green Modules

    I'm looking for 2 green ~1W analog modules for some older projectors. They can be diode or DPSS. They just need to be cheap and small(driver+head). Hoping to spend ~ $300-$400 each. Just need to get these projectors back in working order for home use. Nothing special here.

    Thanks
    10W RGB
    2x 5W RGB
    2x 3W RGB
    2x 1W Green
    ---------------------------------
    QM.NET, 2x FB3, LivePro, Beyond, APC40,

    kgblasers.com

  2. #2
    Join Date
    Feb 2005
    Location
    Switzerland
    Posts
    1,410

    Default

    Hi,

    I could have a pair of these nice 2W 520nm module for sale, as I need one day to upgrade these home-made projectors to 12W+.

    Brightlight brand (european made), still performing at rated power, I installed them late 2015 but haven't used them much since, maybe a few hundreds of hours.

    Super low divergence of <0.7 mrad, beam diameter <5mm. Compact head, drivers are attached on top and back of the module.

    Should fit in the upper range of your budget, they cost me 1500€ each back in the days. Shipping 45$ priority w/tracking.

    Btw if any interest, the other modules should also be on sale - blue 1.5W and red 1W single mode.

    Sebastien
    Attached Thumbnails Attached Thumbnails IMG20220311091543.jpg  

    IMG20220311091600.jpg  

    IMG20220311091624.jpg  


  3. #3
    Join Date
    Feb 2015
    Location
    Luton
    Posts
    17

    Default 2w green modules

    Hi Sebastian
    Do you still have the green modules for sale?
    Do they come with the power supply ect (e.x: Once the ps is powered and signal to the module Connected it’s ready to mount in a enclosure and run a show?

    I’m after just one but if you’re willing to do a deal I’ll buy both

    Kind regards
    William Smith
    Show Time Acoustics ltd
    William Smith | CEO
    M: 07429 548327
    E: info@sparkzdesigns.co.uk
    W: www.sparkzdesigns.co.uk

  4. #4
    Join Date
    Feb 2005
    Location
    Switzerland
    Posts
    1,410

    Default

    Hi William,

    Well yes, they are still installed into my projectors, still haven't upgraded them, so they'll stay there until I decide to upgrade them, and/or find somebody interested.

    I can probably give out the PSU with the laser module if needed. Then yes, you just connect PSU, modulation wires and the module is ready to laser.

    Sebastien




    Quote Originally Posted by SparkzDesigns View Post
    Hi Sebastian
    Do you still have the green modules for sale?
    Do they come with the power supply ect (e.x: Once the ps is powered and signal to the module Connected it’s ready to mount in a enclosure and run a show?

    I’m after just one but if you’re willing to do a deal I’ll buy both

    Kind regards
    William Smith
    Show Time Acoustics ltd

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •