Results 1 to 4 of 4

Thread: Northern VA USA, DPSS YAGs plus lots of goodies for a true laser geek

  1. #1
    Join Date
    Apr 2008
    Location
    DC/VA metro area
    Posts
    415

    Default Northern VA USA, DPSS YAGs plus lots of goodies for a true laser geek

    Looking for a fellow laser geek that can pick up local that likes to tinker with crazy lasers.

    Looking for someone highly familiar with safety.

    This will include:
    - ~2 watt 532nm head
    - 2 x heads spec'ed at 10 watts IR I think
    - 1 smaller head
    - 3 of the digital power supplies. About 2u - 3u high, 12" deep or so
    - 1 smaller digital PSU
    - LOTS OF SPARE OPTICS including YAG rods and other things. Maybe AOMs
    - Power supplies are all computer controlled but have manufacturing firmware so the ePROMs and NVRAMs should be dumped for archival
    - Documentation as well
    - 2 Q-switch drivers/controllers
    - 3 small argon heads + argon PSU
    - Unbilical for the diode systems

    These heads are documented in Sams Laser FAQ. They ARE Q-Switched and have Q-Switch drivers with them.

    The systems and heads are pretty compact, heads are about 18" long, 8" wide 6" high or so.

    A cool dude passed them onto me and I said I would find them a home. I will not sell them for any sort of profit over what he passed it onto me for, and I ask you do the same. I was trying to find a home via SELEM meetup but never did.

    The heads are water cooled, but don't worry there is a Vytron lab chiller to go with them.

    PM me for photos, details on units. Dollar amount is $500 for all*

    Just please don't resell for profit, this is for the hobbyists the tinkerers the geeks.

    Some photos: https://imgur.com/a/Xyd5TVf

    * Would trade for 2 watt xlaser/lightspace/clubmax 30k-40k RGB graphics projector
    Last edited by telmnstr; 01-11-2023 at 08:05.
    Modern and Retro laser show hobbyist
    Pangolin QM16, QM32, Beyond Adv, LSX, ADAT, FB3, FB4
    LS Pluto II x 2, custom build x 1
    http://lasershowwiki.757.org for my all encompassing laser show wiki.

  2. #2
    Join Date
    Apr 2008
    Location
    DC/VA metro area
    Posts
    415

    Default

    Bump, and a photo of the digital power supplies. There is 3 bigger heads, one smaller, lots of optics and replacement YAG parts and all that.
    wo Q switch drivers shown in this pic.
    I've been scanning the documentation to spread it around on the internet.
    Prior owner used Sams laser faq for some guidance, he has info on these heads.
    There is an argon ion supply as well and some single line ion heads.

    I will try to get photos of some of the optics and other goodies.

    Still looking for a home as mentioned above.
    Attached Thumbnails Attached Thumbnails laserwave.jpg  

    Modern and Retro laser show hobbyist
    Pangolin QM16, QM32, Beyond Adv, LSX, ADAT, FB3, FB4
    LS Pluto II x 2, custom build x 1
    http://lasershowwiki.757.org for my all encompassing laser show wiki.

  3. #3
    Join Date
    Jun 2010
    Location
    Blacksburg VA
    Posts
    137

    Default Well...

    I need to replace everything I lost from the storage unit. Have to budget but could probably do it in April if you don't get any other offers.
    Science! Constantly shifting collection of auction purchases, group buys, dumpster dove, and handmade lasers of all types.

  4. #4
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,314

    Default

    mostly interested in the optics you have! any mounts too?
    Everything else would be a bit pricey to ship

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •