Picture of power supply panel and head please...
PSU probably made by a contractor Martek Power, rather then Melles...
I need to find 20 year old notes, if I still have them.
Martek power was bought by Eaton. Eaton Martek may still support you.
Melles was bought by IDEX Corp.
IDEX dropped the
Ion line.
I'm not sure on that model. It looks like the 532 series connector, but could be a model designed to be compatible with JDSU or German machines.
For me the true way to tell would be to open it up and trace certain pins.
You should ask at Dynamic Laser in Utah...
You should have a loop around set of pins for the front panel pot, the head pot, light feedback, and current constant current operation. If the supply is soaring up to the upper limit from lack of controls, it can shorten the life of your tube.
Should also have signals for light and current measurement and interlock/idle. Plus Vref out.
I've had my hands on most models but never an IMA.
Steve
Last edited by mixedgas; 11-26-2023 at 10:57.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...